MSZ 3628-1957 《化学软化水设备技术特点，要求，检测》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GOST 13427-1968 Nuts with hole for handle for machine retaining devices Design and sizes《机器止动装置用带装卸孔螺母 设计和尺寸规格》.pdf

GOST 13428-1968 Dog point pressure screws for machine retaining devices Design《机床夹具用带圆柱端紧定螺钉 结构》.pdf

GOST 13429-1968 Pressure screws with point for foot for machine retaining devvces Desing《机器止动装置用末端带尖的压紧螺钉 设计》.pdf

GOST 13430-1968 Dog point pressure screws with handle for machine retaining devices Design《机器止动装置用带柄且末端为圆柱轴颈止端的压紧螺钉 设计》.pdf

GOST 13431-1968 Point for foot pressure screws with handle for machine retaining devices Design《机床夹具用带手柄和大头端紧定螺钉 结构》.pdf

GOST 13432-1968 Pressure dog point screws with hole for handle for machine retaining devices Design《机器止动装置用带装卸孔且末端为圆柱轴颈止端的压紧螺钉 设计》.pdf

GOST 13433-1968 Pressure screws with hole for handle and point for foot for machine retaining devices Design《机器止动装置用带柄且末端带尖的压紧螺钉 设计》.pdf

GOST 13434-1968 Hexagon head dog point pressure screws for machine retaining devices Desing《机器止动装置用末端为圆柱轴颈止端的六角压紧螺钉 设计》.pdf

GOST 13435-1968 Hexagon head pressure screws with point for foot for machine retaining devices Design《机器止动装置用末端带尖的六角压紧螺钉 设计》.pdf