MSZ 3856-1976 《MSZ 3856-76十字齿铣刀》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GOST 24103-1980 Sewing wares Terms and definitions for defects《缝纫制品 缺陷术语和定义》.pdf

GOST 24105-1980 Plastics products Terms and definitions of defects《塑料制品 缺陷术语和定义》.pdf

GOST 24109-1980 Gauges for keyed joints Tolerances《键连接用量规 公差》.pdf

GOST 24110-1980 Keyway plug gauges with diameter from 9 to 18 mm Design and dimensions《直径 9mm～18mm的键槽塞规 结构及尺寸》.pdf

GOST 24111-1980 Keyway plug gauges with diameter over 18 to 56 mm Design and dimensions《直径 18mm～56mm的键槽塞规 结构及尺寸》.pdf

GOST 24112-1980 Keyway plug gauges with diameter over 56 to 125 mm Design and dimensions《直径56mm～125mm的键槽塞规 结构及尺寸》.pdf

GOST 24113-1980 Key-slotted prism gauges for shafts with diameter over 8 to 22 mm Design and dimensions《直径8mm～22mm的轴用键槽棱柱量规 结构及尺寸》.pdf

GOST 24114-1980 Keyway prism gauges for shafts with diameter over 22 to 200 mm Design and dimensions《直径22mm～200mm的轴用键槽棱柱量规 结构及尺寸》.pdf

GOST 24115-1980 Keyway depth gauges for holes with diameter from 3 to 10 mm Design and dimensions《直径 3mm～10mm的孔用键槽深度量规 结构及尺寸》.pdf