MSZ 3880-1960 《圆柱形把的齿轮的铣床刀具 刀把上带圆锥 直径=16－25》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

SN T 0486.1-1995 出口蛭石检验方法 线膨胀倍数的检验方法（直接测量法）.pdf

SN T 0486.2-1995 出口蛭石检验方法 线膨胀倍数快速检验方法（回归分析法）.pdf

SN T 0486.3-1995 出口蛭石检验方法 筛分试验方法.pdf

SN T 0486.4-1995 出口蛭石检验方法 含砂量的检验方法.pdf

SN T 0487-1995 进出口铜精矿化学分析方法 碘量法测定铜量.pdf

SN T 0503-1995 出口商品运输包装竹胶合板箱检验规程.pdf

SN T 0504-1995 出口锁具检验规程.pdf

SN T 0506-1995 出口手动葫芦检验规程.pdf

SN T 0507-1995 出口开式压力机检验规程.pdf