MSZ 4185-1958 《医用帽子》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD WSK-M2P164-A-2006 PAINT PERFORMANCE PRIMED PLASTIC PARTS INTERMEDIATE STORAGE TO BE USED WITH FORD WSS-M99P1111-A 《中间存储器用涂覆底漆的塑料部件用油漆的性能 与标准FORD WSS-M99P1111-A一起使用 使用WSS-M.pdf

FORD WSK-M2P168-A-2010 PAINT PERFORMANCE ZINC-RICH PRIMER COOLING AND ALLIED TUBES TO BE USED WITH FORD WSS-M99P1111-A 《冷却和联合管富锌底漆的涂料性能 与福特WSS-M99P1111-A 一起使用[使用 福特WSS-M2P181-C.pdf

FORD WSK-M2P169-A-2008 PAINT PERFORMANCE ENGINE COMPARTMENT HIGH DURABILITY TO BE USED WITH FORD WSS-M99P1111-A 《发动机舱用高耐久性油漆的性能 与标准FORD WSS-M99P1111-A一起使用 [使用 FORD WSS-M2P185-A.pdf

FORD WSK-M32J124-A-1990 PAINT METALLIC BASECOAT IN BASECOAT CLEARCOAT SYSTEM BAKING EXTERIOR TOP COAT《汽车外部的外涂层用底涂层 透明涂层系统中用烘干式底涂金属性油漆》.pdf

FORD WSK-M32J125-A-1990 PAINT CLEARCOAT IN BASECOAT CLEARCOAT SYSTEM BAKING EXTERIOR TOP COAT《汽车外部的外涂层用底涂层 透明涂层系统中用烘干式透明涂层油漆》.pdf

FORD WSK-M3D154-A-2004 UNSATURATED POLYESTER (UP) INJECTION MOLDING COMPOUND 17% GLASS FIBER REINFORCED HIGH HEAT RESISTANT TO BE USED WITH FORD WSS-M99P1111-A 《17%玻璃纤维增强的耐高温不饱和聚.pdf

FORD WSK-M3D162-A-2004 PHENOLIC (PF) COMPRESSION MOLDING COMPOUND 50% MINERAL GLASS FIBER FILLED TO BE USED WITH FORD WSS-M99P1111-A 《50%矿物 玻璃纤维填充的酚醛树脂（PF）模压成型料 与标准FORD WSS-M99P.pdf

FORD WSK-M3D168-A1-2006 PHENOLIC (PF) 40% WOOD FLOUR FILLED INJECTION MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《40%木屑填充的酚醛树脂（PF）注塑成型料 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD WSK-M3D168-A2-2004 PHENOLIC (PF) 40% WOOD FLOUR FILLED COMPRESSION MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《40%木屑填充的酚醛树脂（PF）模压成型料 与标准FORD WSS-M99P1111-A一起使用 》.pdf