MSZ 433-1987 《大轮模量圆柱》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM D4337-1989(2009) Standard Test Methods for Analysis of Linear Detergent Alkylates《直链洗涤剂烷基化物分析的标准试验方法》.pdf

ASTM D4337-1989(2017) Standard Test Methods for Analysis of Linear Detergent Alkylates《线性洗涤剂烷基化物分析的标准试验方法》.pdf

ASTM D4338-1997(2004) Standard Test Method for Flexibility Determination of Supported Adhesive Films by Mandrel Bend《用芯轴弯曲试验法测定承托粘结膜挠曲度的标准试验方法》.pdf

ASTM D4338-1997(2011)e1 Standard Test Method for Flexibility Determination of Supported Adhesive Films by Mandrel Bend《用芯轴弯曲试验法对承托粘结膜的挠曲度的标准试验方法》.pdf

ASTM D4338-1997(2016) Standard Test Method for Flexibility Determination of Supported Adhesive Films by Mandrel Bend《通过芯轴弯曲测定支持胶粘剂弹性的标准试验方法》.pdf

ASTM D4339-2001(2007) Standard Test Method for Determination of the Odor of Adhesives《测定胶粘剂气味的标准试验方法》.pdf

ASTM D4339-2001(2013) Standard Test Method for Determination of the Odor of Adhesives《测定胶粘剂气味的标准试验方法》.pdf

ASTM D4340-1996(2007) Standard Test Method for Corrosion of Cast Aluminum Alloys in Engine Coolants Under Heat-Rejecting Conditions《在排热条件下发动机冷却剂对铸造铝合金腐蚀性的标准试验方法》.pdf

ASTM D4340-2010 Standard Test Method for Corrosion of Cast Aluminum Alloys in Engine Coolants Under Heat-Rejecting Conditions《在排热条件下发动机冷却剂对铸造铝合金腐蚀性的标准试验方法》.pdf