MSZ 4426-1976 《筒型把的，1 50锥形手动锉》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD WSB-M4D658-A-2003 POLYPHENYLENE ETHER + POLYAMIDE BLEND (PPE+PA) HEAT STABILIZED 10% GLASS FIBER REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《聚苯醚+聚酰胺混合物(.pdf

FORD WSB-M4D658-A2-2010 POLYPHENYLENE ETHER + POLYAMIDE BLEND (PPE+PA) HEAT STABILIZED 10% GLASS FIBER REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《聚亚苯基乙醚+聚酰胺.pdf

FORD WSB-M4D662-A-2010 POLYAMIDE (PA) 66 IMPACT MODIFIED 20% PTFE POWDER FILLED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《20%聚四氟乙烯(PTFE)粉末填充的聚酰胺66冲击改性成型料 与标准FORD WSS.pdf

FORD WSB-M4D677-A-2005 POLYAMIDE (PA) 66 30% LONG GLASS FIBER REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《30%长玻璃纤维增强的聚酰胺66成型料 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD WSB-M4D678-A-2005 POLYAMIDE (PA) 66 40% LONG GLASS FIBER REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A (Shown on WSB-M4D677-A)《40%长玻璃纤维增强的聚酰胺66成型料 与标准FORD.pdf

FORD WSB-M4D679-A-2005 POLYAMIDE (PA) 66 50% LONG GLASS FIBER REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A (Shown on WSB-M4D677-A)《50%长玻璃纤维增强的聚酰胺66成型料 与标准FORD.pdf

FORD WSB-M4D680-A-2005 POLYAMIDE (PA) 66 60% LONG GLASS FIBER REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A (Shown on WSB-M4D677-A Replaces WSK-M4D850-A 2006)《6.pdf

FORD WSB-M4D682-A3-2013 ACRYLONITRILE STYRENE ACRYLATE + POLYCARBONATE BLEND (ASA+PC) MEDIUM HEAT RESISTANT MOLDING COMPOUND EXTERIOR TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSB-M4D683-A-2011 THERMOPLASTIC ETHER ESTER ELASTOMER (TEEE) MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《热塑性乙醚酯弹性体(TEEE)模塑材料 与福特WSS-M99P1111-A 一起使用》.pdf