MSZ 740-1958 《铜排，棒》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

BS ISO 247-2006 Rubber - Determination of ash《橡胶 灰分的测定》.pdf

BS ISO 2470-1-2016 Paper board and pulps Measurement of diffuse blue reflectance factor Indoor daylight conditions (ISO brightness)《纸、纸板和纸浆 蓝光漫反射因数的测定 室内日光条件(ISO 亮度)》.pdf

BS ISO 2475-2011 Chloroprene rubber (CR) General-purpose types Evaluation procedure《氯丁橡胶(CR) 通用型 评定方法》.pdf

BS ISO 2476-2014 Butadiene rubber (BR) Solution-polymerized types Evaluation procedures《丁二烯橡胶 (BR) 溶液聚合型 评价程序》.pdf

BS ISO 248-1-2011 Rubber raw Determination of volatile-matter content Hot-mill method and oven method《未加工的橡胶 挥发物含量的测定 热轧机方法和烤炉方法》.pdf

BS ISO 248-2-2012 Rubber raw Determination of volatile-matter content Thermogravimetric methods using an automatic analyser with an infrared drying unit《生橡胶 挥发物含量的测定 使用带有红外线干燥设备的自动.pdf

BS ISO 249-2016 Rubber raw natural Determination of dirt content《天然生胶 杂质含量的测定》.pdf

BS ISO 2490-2007 Solid (monobloc) gear hobs with tenon drive or axial keyway 0 5 to 40 module - Nominal dimensions《模数0 5至40榫传动或轴键带动的实心(整体)齿轮滚刀 标称尺寸规格》.pdf

BS ISO 24917-2010 Space systems General test requirements for launch vehicles《空间系统 运载火箭用一般试验要求》.pdf