MSZ 810 15-1980 《粉状涂料的检验，湿度检验》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD WSS-M7C91-B-2014 CORROSION PREVENTIVE PAINT TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M7C93-A-2004 CAVITY WAX WATER BASED MEDIUM SOLID 50% SOLID TO BE USED WITH FORD WSS-M99P1111-A 《中等含固量（50%）的水基空腔蜡 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD WSS-M7C94-A-2014 RUST PREVENTIVE CHASSIS TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M7C95-A-2004 SUPERFICIAL WAX SOLVENT BASED 35% SOLIDS TO BE USED WITH FORD WSS-M99P1111-A 《35%含固量的溶剂型饰面蜡 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD WSS-M7C96-A1-2008 CAVITY WAX HEAT KICK 60 0-EMISSION CORROSION PROTECTION AUTOMOTIVE CAVITIES TO BE USED WITH FORD WSS-M99P1111-A 《汽车空腔处防腐用热剥离温度为60℃的0排放空腔蜡 与标准FORD WSS-M99P.pdf

FORD WSS-M7C96-A2-2008 CAVITY WAX HEAT KICK 60 0-EMISSION ODOR APPROVED CORROSION PROTECTION AUTOMOTIVE CAVITIES TO BE USED WITH FORD WSS-M99P1111-A 《汽车空腔处用热剥离温度为60℃、气味经批准的0排放防腐空.pdf

FORD WSS-M7C97-A-2009 CAVITY WAX HEAT KICK 60 DEGREE C 0-EMISSION ODOR APPROVED IMPROVED CREEP CHARACTERISTIC CORROSION PROTECTION AUTOMOTIVE CAVITIES TO BE USED WITH FORD WSS-M99.pdf

FORD WSS-M7C97-A2-2011 CAVITY WAX HEAT KICK 60 IMPROVED CREEP CHARACTERISTIC LOW VISCOSITY CORROSION PROTECTION AUTOMOTIVE CAVITIES TO BE USED WITH FORD WSS-M99P1111-A 《高温反冲60 ℃改.pdf

FORD WSS-M7G7-B2-2011 LABEL HOT STAMP TRANSFER - INTERIOR QUALITY RIGID SUBSTRATES TO BE USED WITH FORD WSS-M99P1111-A 《热模锻传递的标签 内部质量 硬式基板 与福特WSS-M99P1111-A 一起使用[使用 福特WSS-M99P4.pdf