MSZ 871-5 lap-1959 《皮制品检测方法 厚度，长度和宽度的测量》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

DIN ISO 1089-1985 Electrode taper fits for spot welding equipment dimensions identical with ISO 1089 edition 1980《点焊设备的电极锥度配合 尺寸》.pdf

DIN ISO 10897-2006 Collets for tool holders with taper ratio 1 10 - Collets holders nuts (ISO 10897 1996) English version of DIN ISO 10897 2006-01《刀具夹用1 10锥度的夹头 夹头、夹柄和螺母》.pdf

DIN ISO 109-1985 Textile machinery working widths of weaving machines identical with ISO 109 edition 1982《纺织机械 织机的工作宽度 等同采用ISO 109－1982年版本》.pdf

DIN ISO 10907-1-2010 Tools for moulding - Locating rings - Part 1 Locating rings for mounting without thermal insulating sheets in small or medium moulds (types A and B) (ISO 10907.pdf

DIN ISO 10907-2-2010 Tools for moulding - Locating rings - Part 2 Locating rings for mounting with thermal insulating sheets in small or medium moulds (types C and D) (ISO 10907-2 .pdf

DIN ISO 10910-2000 Classification and designation of approximate chip control zones for indexable inserts with chipbreakers (ISO 10910 1995)《有断屑器的可换位刀片的近似切屑控制范围的分类和命名》.pdf

DIN ISO 1095-1994 Shipbuilding and marine structures toughened safety glass panes for ships- side scuttles identical with ISO 1095 1989《造船和海上结构 侧舷窗用钢化安全玻璃板》.pdf

DIN ISO 10958-1-1999 Snowboards - Binding mounting area - Part 1 Requirements and test methods for snowboards without inserts (ISO 10958-1 1998)《滑雪板 捆绑固定区 第1部分 非插入式滑雪板的要求和试验方法》.pdf

DIN ISO 10958-2-2016 Snowboards - Binding mounting area - Part 2 Requirements and test methods for snowboards with inserts (ISO 10958-2 2015)《滑雪板 捆绑安装区 第2部分 刀片式滑雪板的要求和试验方法(ISO 1095.pdf