MSZ 10147-1963 《抻拉的椭圆形钢材》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

EN ISO 648-2008 en Laboratory glassware - Single-volume pipettes《实验室玻璃器具 单一容量吸液管》.pdf

EN ISO 6497-2005 en Animal feeding stuffs - Sampling《动物饲料 抽样 (ISO 6497)-2002》.pdf

EN ISO 6498-2012 en Animal feeding stuffs - Guidelines for sample preparation《动物饲料 试样制备指南》.pdf

EN ISO 6504-1-2006 en Paints and varnishes - Determination of hiding power - Part 1 Kubelka-Munk method for white and light-coloured paints《色漆和清漆 遮盖力的测定 第1部分 白色和浅色色漆用库比尔凯-芒克法》.pdf

EN ISO 6504-3-2007 en Paints and varnishes - Determination of hiding power - Part 3 Determination of contrast ratio of light-coloured paints at a fixed spreading rate《涂料和清漆 遮盖力测定 第.pdf

EN ISO 6506-1-2014 en Metallic materials - Brinell hardness test - Part 1 Test method《金属材料 布氏硬度试验 第1部分 试验方法(ISO 6506-1 2014)》.pdf

EN ISO 6506-2-2014 en Metallic materials - Brinell hardness test - Part 2 Verification and calibration of testing machines《金属材料 布氏硬度试验 第2部分 试验机的检验和校准(ISO 6506-2 2014)》.pdf

EN ISO 6506-3-2014 en Metallic materials - Brinell hardness test - Part 3 Calibration of reference blocks《金属材料 布氏硬度试验 第3部分 标准试块的校验(ISO 6506-3 2014)》.pdf

EN ISO 6506-4-2014 en Metallic materials - Brinell hardness test - Part 4 Table of hardness values《金属材料 布氏硬度试验 第4部分 硬度数值表(ISO 6506-4 2014)》.pdf