MSZ 10623-1959 《车削镗工种子钻进衬砌管挂》.pdf

相关资源

ISO 1717-1974 Rock drilling Rotary drill-rods and rotary drill-bits for dry drilling Connecting dimensions《岩石钻孔 干式回转钻进钻杆和钻头 连接尺寸》.pdf

DZ T 0054-1993 定向钻进技术规范.pdf

GOST 16293-1989 Unitized drilling rigs for development and deep exploratory drilling Basic parameters《开发钻进和深孔钻进用成套钻机 基本参数》.pdf

SY T 5272-1991 常规钻进安全技术规程.pdf

第三章 金刚石钻进.ppt

DZ T 0054-1993 定向钻进技术条件规范.pdf

MNOSZ 10650-1953 《车削镗工种子钻进对管道救援》.pdf

SY 5272-1991 常规钻进安全技术规程.pdf

NB T 10174-2019 矿用定向钻进随钻测量装置技术条件.pdf

猜你喜欢

FORD WSF-M4D757-A-2010 POLYCARBONATE (PC) 12 5% TiO2 FILLED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《聚碳酸酯(PC) 12 5%二氧化钛填充模塑材料 与福特WSS-M99P1111-A 一起使用[使用 福特WSS-M4D10.pdf

FORD WSF-M4D767-A-2010 POLYCARBONATE + THERMOPLASTIC COPOLYESTER BLEND (PC + PCTA) FILM TRANSLUCENT TO BE USED WITH FORD WSS-M99P1111-A 《透明的聚碳酸酯+热塑性共聚酯混合物(PC+PCTA)膜 与福特WSS-M99P1.pdf

FORD WSF-M4D770-A-2010 POLYIMIDE (PI) 13% GRAPHITE POWDER 10% PTFE FILLED SINTERED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《13%石墨粉 10%聚四氟乙烯(PTFE)填充的聚酰亚胺(PI)烧结成型料 与标.pdf

FORD WSF-M4D770-A2-2010 POLYIMIDE (PI) 37% GRAPHITE POWDER FILLED SINTERED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《37%石墨粉填充的聚酰亚胺(PI)烧结成型料 与标准FORD WSS-M99P1111-A一起使.pdf

FORD WSF-M4D774-A-2006 POLYETHERSULFONE (PESU) 30% GLASS FIBER REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《30%玻璃纤维增强的聚醚砜（PESU）成型料 与标准FORD WSS-M99P1111-A一起使用.pdf

FORD WSF-M4D774-A2-2006 POLYETHERSULFONE (PESU) 30% GLASS FIBER REINFORCED MOLDING COMPOUND REDUCED FLOW RATE TO BE USED WITH FORD WSS-M99P1111-A (Shown on WSF-M4D774-A)《低流动性的30%.pdf

FORD WSF-M4D779-A-2010 POLYETHYLENE TEREPHTHALATE (PET) 35% GLASS FIBER MICA REINFORCED MOLDING COMPOUND 100% RECYCLED PET TO BE USED WITH FORD WSS-M99P1111-A 《聚乙烯对苯二甲酸酯(PET) 35%.pdf

FORD WSF-M4D785-A3-2008 ABS + POLYCARBONATE BLEND (ABS+PC) 12% TiO2 FILLED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《12%二氧化钛填充丙烯腈-丁二烯-苯乙烯+聚碳酸酯(ABS+PC)混物模塑料v和一起使用(FORD.pdf

FORD WSF-M4D786-A-2006 POLYAMIDE (PA) 66 35% LONG GLASS FIBER REINFORCED HEAT STABILIZED IMPACT MODIFIED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A (Use WSB-M4D678-A)《3.pdf