MSZ 5020-1969 《金属切割大型机械 炮塔车床主要尺寸》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

BS EN ISO 2106-2011 Anodizing of aluminium and its alloys Determination of mass per unit area (surface density) of anodic oxidation coatings Gravimetric method《铝及铝合金阳极氧化 阳极氧化涂层每单位面.pdf

BS EN ISO 2114-2000 Plastics (polyester resins) and paints and varnishes (binders) - Determination of partial acid value and total acid value《塑料(聚酯树脂)、涂料和清漆(粘合剂) 部分酸值和总酸值的测定》.pdf

BS EN ISO 2128-2010 Anodizing of aluminium and its alloys Determination of thickness of anodic oxidation coatings Non-destructive measurement by split-beam microscope《铝和铝合金的阳极氧化 阳极.pdf

BS EN ISO 2151-2008 Acoustics - Noise test code for compressors and vacuum pumps - Engineering method (Grade 2)《声学 压缩机和真空泵的噪声试验规程 工程法(2级)》.pdf

BS EN ISO 2157-2016 Dentistry Nominal diameters and designation code numbers for rotary instruments《牙科 旋转器械的公称直径和命名代码》.pdf

BS EN ISO 216-2008 Writing paper and certain classes of printed matter Trimmed sizes A and B series and indication of machine direction《印刷品的书写纸和规定等级 裁切尺寸 A和B系列及机器标记范围》.pdf

BS EN ISO 2162-1-1996 Technical product documentation - Springs - Simplified representation《技术产品文件 弹簧 简化表示法》.pdf

BS EN ISO 2162-2-1996 Technical product documentation - Springs - Presentation of data for cylindrical helical compression springs《技术产品文件 弹簧 圆柱形螺旋压缩弹簧数据表示》.pdf

BS EN ISO 217-2013 Paper Untrimmed sizes Designation and tolerances for primary and supplementary ranges and indication of machine direction《纸 未裁切尺寸 原始范围和辅助范围的命名和公差以及机械方向的指定》.pdf