MSZ 5200 9 lap-1957 《发电机水检测 硫酸离子含量定义》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

AGMA 09FTM05-2009 Hypoloid Gears with Small Shaft Angles and Zero to Large Offsets《小轴间角和偏心距大于零的双曲线齿轮》.pdf

AGMA 09FTM06-2009 Dependency of the Peak-to-Peak-Transmission-Error on the Type of Profile Correction and the Transverse Contact Ratio of the Gear Pair《齿轮副轮廓修形和端面啮合度峰到峰传输错误的相关性》.pdf

AGMA 09FTM07-2009 Optimizing Gear Geometry for Minimum Transmission Error Mesh Friction Losses and Scuffing Risk Through Computer Aided Engineering《通过计算机辅助工程优化齿轮的最小传输错误、啮合摩擦损耗和胶合风险.pdf

AGMA 09FTM08-2009 Load Sharing Analysis of High Contact Ratio Spur Gears in Military Tracked Vehicle Application《军用履带车辆上高啮合系数直齿轮的负载共享分析》.pdf

AGMA 09FTM09-2009 Designing for Static and Dynamic Loading of a Gear Reducer Housing with FEA《带FEA的齿轮减速器壳体静态和动态负载的设计》.pdf

AGMA 09FTM10-2009 The Effect of Flexible Components on the Durability Whine Rattle and Efficiency of an Automotive Transaxle Geartrain System《挠性组件对汽车变速驱动桥齿轮组系统耐久性、噪声和效率的影响》.pdf

AGMA 09FTM11-2009 Unique Design Constraints for Molded Plastic Transmissions《模型塑料传送的唯一设计约束》.pdf

AGMA 09FTM12-2009 The Anatomy of a Micropitting Induced Tooth Fracture Failure - Causation Initiation Progression and Prevention《含断齿故障的微点蚀的分解.起因、开始、前进和防护》.pdf

AGMA 09FTM13-2009 Bending Fatigue Impact and Pitting Resistance of Ausform Finished P M Gears《形变热处理磨光P M齿轮的弯曲疲劳、冲击和抗孔蚀性》.pdf