MSZ 5281 1 lap-1959 《塔式车床刀架大型机械连接 多刀型车床刀架》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GOST R IEC 60745-2-16-2012 Hand-held motor-operated electric tools Safety and test methods Part 2-16 Particular requirements for tackers《手持式电动工具 安全和试验方法 第2-16部分 敲钉器的特殊要求》.pdf

GOST R IEC 60745-2-20-2011 Hand-held motor-operated electric tools Safety and test methods Part 2-20 Particular requirements for band saws《手持式电动工具 安全性和试验方法 第2-20部分 带锯的详细要求》.pdf

GOST R IEC 60745-2-3-2011 Hand-held motor-operated electric tools Safety and test methods Part 2-3 Particular requirements for grinders polishers and disk-type sanders with rotatio.pdf

GOST R IEC 60755-2012 General requirements for differential (residual) current operated protective devices《剩余电流驱动保护器的通用要求》.pdf

GOST R IEC 60789-2010 Characteristics and test conditions of radionuclide imaging devices Anger type gamma cameras《Anger型射线照相机的放射性核素成像设备的特性和试验条件》.pdf

GOST R IEC 60793-1-20-2012 Optical fibres Part 1-20 Measurement methods and test procedures Fibre geometry《光纤 第1-20部分 测量方法和试验规程 纤维几何形状》.pdf

GOST R IEC 60793-1-21-2012 Optical fibres Part 1-21 Measurement methods and test procedures Coating geometry《光纤 第1-21部分 测量方法和试验规程 涂层几何形状》.pdf

GOST R IEC 60793-1-22-2012 Optical fibres Part 1-22 Measurement methods and test procedures Length measurement《光纤 第1-22部分 测量方法和试验规程 长度测量》.pdf

GOST R IEC 60793-1-33-2014 Optical fibres Part 1-33 Measurement methods and test procedures Stress corrosion susceptibility《光纤 第1-33部分 测量方法和试验规程 应力腐蚀敏感性》.pdf