MSZ 5282 22 lap-1958 《鼓车床刀架大型机械连接外部紧固》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD WSB-M15H63-A-2009 THREAD POLYESTER SERGING TEXTURED TO BE USED WITH FORD WSS-M99P1111-A 《有纹理的包片聚酯线 与标准FORD WSS-M99P1111-A一起使用 ［使用 FORD WSS-M8P5-C］》.pdf

FORD WSB-M15H64-A-2010 THREAD NYLON SERGING BULKED TEXTURED TO BE USED WITH FORD WSS-M99P1111-A 《TEX 300的BULKED纹理的包边尼龙线 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD WSB-M15J8-A1-2012 CLEAR TOPCOAT ABRASION RESISTANT ANTI-STATIC TRANSPARENT PLASTIC PARTS TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSB-M15J8-A2-1993 CLEAR TOPCOAT ABRASION RESISTANT TRANSPARENT PLASTIC PARTS (Shown on WSB-M15J8-A1)《透明塑料部件用耐磨透明面漆 列于标准WSB-M15J8-A1上》.pdf

FORD WSB-M15P26-C-2010 PERFORMANCE ARMREST TO BE USED WITH FORD WSS-M99P1111-A 《扶手的性能 与标准FORD WSS-M99P1111-A一起使用 ［使用 FORD WSS-M15P26-D］》.pdf

FORD WSB-M15P35-A1-2013 PERFORMANCE REQUIREMENTS THERMOPLASTIC POSITIVE LOCKING TRIM FASTENER TYPE I TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSB-M15P35-A2-2013 PERFORMANCE REQUIREMENTS THERMOPLASTIC POSITIVE LOCKING TRIM FASTENER TYPE II TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSB-M15P35-A1).pdf

FORD WSB-M15P35-A3-2013 PERFORMANCE REQUIREMENTS THERMOPLASTIC POSITIVE LOCKING TRIM FASTENER TYPE III TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSB-M15P35-A1).pdf

FORD WSB-M15P35-A4-2013 PERFORMANCE REQUIREMENTS THERMOPLASTIC POSITIVE LOCKING TRIM FASTENER TYPE IV TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSB-M15P35-A1).pdf