MSZ 5352-1965 《纸张检测 薄荷含量》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM E1611-2000(2013) Standard Guide for Conducting Sediment Toxicity Tests with Polychaetous Annelids《用多毛纲环节动物作沉积物毒性试验的标准指南》.pdf

ASTM E1612 E1612M-1994(2013)e1 Standard Specification for Preformed Architectural Compression Seals for Buildings and Parking Structures《建筑物和停车场结构用预成形建筑压缩密封件的标准规范》.pdf

ASTM E1612 E1612M-1994(2017) Standard Specification for Preformed Architectural Compression Seals for Buildings and Parking Structures《建筑物和停车场结构用预成形建筑压缩密封件的标准规格》.pdf

ASTM E1612-1994(2005) Standard Specification for Preformed Architectural Compression Seals for Buildings and Parking Structures《建筑物和停车场结构用预成形建筑压缩密封件标准规范》.pdf

ASTM E1612-1994(2009) Standard Specification for Preformed Architectural Compression Seals for Buildings and Parking Structures《建筑物和停车场结构用预成形建筑压缩密封件的标准规范》.pdf

ASTM E1613-2004 Standard Test Method for Determination of Lead by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES) Flame Atomic Absorption Spectrometry (FAAS) or GG.pdf

ASTM E1613-2012 Standard Test Method for Determination of Lead by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES) Flame Atomic Absorption Spectrometry (FAAS) or GG.pdf

ASTM E1614-1994(2004) Standard Guide for Procedure for Measuring Ionizing Radiation-Induced Attenuation in Silica-Based Optical Fibers and Cables for Use in Remote Fiber-Optic Spec.pdf

ASTM E1614-1994(2013) Standard Guide for Procedure for Measuring Ionizing Radiation-Induced Attenuation in Silica-Based Optical Fibers and Cables for Use in&x2009 Remote&x2009 Fibey.pdf