MSZ 5470-1987 《空气渗透纸张和纸板的器具》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GOST EN 824-2011 Thermal insulating products for building applications Method for determination of deviation from squareness《建筑用热绝缘产品 方形偏差的测定方法》.pdf

GOST EN 825-2011 Thermal insulating products for building applications Methods for determination urement of deviation from flatness《建筑用热绝缘产品 平直度偏差的测定方法》.pdf

GOST EN 826-2011 Thermal insulating products for building applications Methods for determination of compression behaviour《建筑用热绝缘产品 压缩性能的测定方法》.pdf

GOST EN 848-2-2013 Safety of woodworking machines One side milling machines Part 2 Single spindle milling machines with vertical upper arrangement of spindle《木工机械的安全性 单面铣床 第2部分 带有主.pdf

GOST EN 894-1-2012 Safety of machinery Ergonomics requirements for the design of displays and control actuators Part 1 General principles for human interactions with displays and c.pdf

GOST EN 894-3-2012 Safety of machinery Ergonomics requirements for the design of displays and control actuators Part 3 Control actuators《机械安全 显示器和控制传动器设计的人体工效学要求 第3部分 控制传动器》.pdf

GOST EN ISO 13982-1-2012 Occupational safety standards system Protective clothing for use against solid particulates Part 1 Performance requirements for chemical protective clothinst a.pdf

GOST IEC 60027-4-2013 Letter symbols to be used in electrical technology Part 4 Rotating electric machines《电气技术中使用的字母符号 第4部分 旋转电机》.pdf

GOST IEC 60034-14-2014 Rotating electrical machines Part 14 Mechanical vibration of certain machines with shaft heights 56 mm and higher Measurement evaluation and limits of vibrat.pdf