MSZ 5706-1960 《成型器柜》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

DIN 2240-2-2001 Geometrical Product Specification (GPS) - Handles - Part 2 For gauging members over 40 mm nominal diameter Handles fixing screws and clamps《几何产品规范(GPS) 手柄 第2部分 公称直径.pdf

DIN 22400-1990 Control units of winding engines hoists and winches for mining《提升机的控制装置 采矿用起重机和绞车》.pdf

DIN 22405-1990 Friction pulley linings for winches and winders in mining《矿井提升机和卷扬机用摩擦轮衬层》.pdf

DIN 22406-1986 Low speed Koepe winding machines with friction wheel for shafts and drifts braking system calculation formulae《装有摩擦轮的低速Koepe传动钢索卷绕机 制动系统计算公式》.pdf

DIN 22410-1994 Winding rope pulleys for round ropes《圆索用提升钢索滑轮》.pdf

DIN 22416-1986 Electrical apparatus for potentially explosive atmospheres in mining triangular head bolts safety requirements and testing《采矿用于预防潜在爆炸环境爆的电气设备 三角头螺栓 安全性要求和试验》.pdf

DIN 22417-1988 Electrical apparatus for potentially explosive atmospheres forms of keys for triangular socket wrenches《潜在爆炸的环境中使用的电气设备 三角套筒扳手的传动键的形状》.pdf

DIN 22418-1989 Electrical apparatus for potentially explosive atmospheres for mining screw plugs safety requirements and testing《矿山预防潜在的爆炸环境用的电气设备；螺旋接头 安全性要求和试验》.pdf

DIN 22419-1-2004 Electrical apparatus for potentially explosive atmospheres for mining - Cable entries - Part 1 Safety requirements and testing《用于潜在爆炸性环境的采掘电气装置 电缆引入线 第1部分 安全要求和检验》.pdf