MSZ 5920 5 lap-1968 《防火以及其他化学原材料和产品检测 铝硅综合元素模式 氧化铁含量定义》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

DIN ISO 10889-3-2006 Tool holders with cylindrical shank - Part 3 Type B with rectangular radial seat (ISO 10889-3 2004) English version of DIN ISO 10889-3 2006-01《带圆柱柄的刀具夹 第3部分 矩形.pdf

DIN ISO 10889-4-2006 Tool holders with cylindrical shank - Part 4 Type C with rectangular axial seat (ISO 10889-4 2004) English version of DIN ISO 10889-4 2006-01《带圆柱柄的刀具夹 第4部分 矩形轴.pdf

DIN ISO 10889-5-2006 Tool holders with cylindrical shank - Part 5 Type D with more than one rectangular seat (ISO 10889-5 1997) English version of DIN ISO 10889-5 2006-01《带圆柱柄的刀具夹 .pdf

DIN ISO 10889-6-2006 Tool holders with cylindrical shank - Part 6 Type E with cylindrical seat (ISO 10889-6 2004) English version of DIN ISO 10889-6 2006-01《带圆柱柄的刀具夹 第6部分 圆柱基座的E型刀柄.pdf

DIN ISO 10889-7-2006 Tool holders with cylindrical shank - Part 7 Type F with taper seat (ISO 10889-7 2004) English version of DIN ISO 10889-7 2006-01《带圆柱柄的刀具夹 第7部分 锥形基座的F型刀柄》.pdf

DIN ISO 10889-8-2006 Tool holders with cylindrical shank - Part 8 Type Z accessories (ISO 10889-8 1997) English version of DIN ISO 10889-8 2006-01《带圆柱柄的刀具夹 第8部分 Z型、附件》.pdf

DIN ISO 1089-1985 Electrode taper fits for spot welding equipment dimensions identical with ISO 1089 edition 1980《点焊设备的电极锥度配合 尺寸》.pdf

DIN ISO 10897-2006 Collets for tool holders with taper ratio 1 10 - Collets holders nuts (ISO 10897 1996) English version of DIN ISO 10897 2006-01《刀具夹用1 10锥度的夹头 夹头、夹柄和螺母》.pdf

DIN ISO 109-1985 Textile machinery working widths of weaving machines identical with ISO 109 edition 1982《纺织机械 织机的工作宽度 等同采用ISO 109－1982年版本》.pdf