MSZ 6521-1983 《普通双面柱形管》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD WSS-M4D926-A2-2010 POLYCARBONATE (PC) IMPACT MODIFIED 25% MINIMUM RECYCLED CONTENT MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《冲击改良25%最低回收成分的聚碳酸酯(PC)模塑材料 与福特WSS-M.pdf

FORD WSS-M4D927-A1-2015 POLYPROPYLENE (PP) HOMOPOLYMER 30% MINERAL FILLED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M4D928-A2-2010 POLYCARBONATE + POLYBUTYLENE TEREPHTHALATE BLEND (PC+PBT) MODIFIED MOLDING COMPOUND RECYCLATE 25% MINIMUM RECYCLED CONTENT TO BE USED WITH FORD WSS-M99P111.pdf

FORD WSS-M4D929-A2-2012 POLYBUTYLENE TEREPHTHALATE (PBT) MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M4D929-A3-2006 POLYBUTYLENE TEREPHTHALATE 30 % GLASS FILLED INTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《汽车内部用30 %玻璃填充的聚对苯二甲酸丁二醇酯 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD WSS-M4D930-A1-2010 POLYETHER BLOCK AMIDE (PEBA) HEAT AND UV STABILIZED EXTRUSION AND INJECTION MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《耐高温、对紫外线稳定的聚醚嵌段酰胺(PEBA)挤.pdf

FORD WSS-M4D931-A1-2011 POLYETHYLENE HIGH DENSITY (PE-HD) 25% MICA FILLED BLOW MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《高密度(PE-HD)25%云母填充聚乙烯吹塑材料 与福特WSS-M99P1111-A .pdf

FORD WSS-M4D932-A1-2014 POLYPROPYLENE (PP) COPOLYMER BLOW MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M4D932-B1-2014 POLYPROPYLENE (PP) COPOLYMER MEDIUM IMPACT COMPOUND BLOW MOLDED UNDERHOOD TO BE USED WITH FORD WSS-M99P1111-A .pdf