MSZ 7346-1962 《单人电动起重机的主要资料和运行速度》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM C1798-2016 Standard Specification for Returned Fresh Concrete for Use in a New Batch of Ready-Mixed Concrete《新一批预拌混凝土中使用的被退回的新拌混凝土的标准规格》.pdf

ASTM C1799 C1799M-2014 Standard Guide to Dimension Stone Test Specimen Sampling and Preparation《规格石料试样取样和制备的标准指南》.pdf

ASTM C1800 C1800M-2016 Standard Test Method for Determining Density of Roller-Compacted Concrete Specimens Using the Gyratory Compactor《使用旋转式压实机测定碾压混凝土试样密度的标准试验方法》.pdf

ASTM C1802-2014 Standard Specification for Design Testing Manufacture Selection and Installation of Fabricated Metal Access Hatches for Utility Water and Wastewater Structures《设计 试.pdf

ASTM C1802-2014e1 Standard Specification for Design Testing Manufacture Selection and Installation of Fabricated Metal Access Hatches for Utility Water and Wastewater Structures《设计.pdf

ASTM C1802-2018 Standard Specification for Design Testing Manufacture Selection and Installation of Fabricated Metal Access Hatches for Utility Water and Wastewater Structures《设计 试.pdf

ASTM C1802-2018a Standard Specification for Design Testing Manufacture Selection and Installation of Fabricated Metal Horizontal Access Hatches for Utility Water and Wastewater Str.pdf

ASTM C1803-2015 Standard Guide for Abrasion Resistance of Mortar Surfaces Using a Rotary Platform Abraser《使用旋转平台磨料测定砂浆表面耐磨性的标准指南》.pdf

ASTM C1804-2014 Standard Specification for Spun Cast Prestressed Concrete Bases for Tapered Steel Lighting Poles《用于锥形钢照明杆的离心成型预应力混凝土基础的标准规格》.pdf