MSZ 7356-1966 《砒啶》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GOST 24239-1984 Variable wire-wound resistors General specifications《线绕可变电阻器 一般技术条件》.pdf

GOST 24240-1984 Fixed and variable vacuum capacitors General specifications《真空固定和可变电容器 一般技术条件》.pdf

GOST 24242-1997 Hydraulic fluid power Identification of component ports subplates control devices and electromagnets《容积式液压传动装置 液压装置、安装板、控制装置及电磁铁的连接孔的字母符号》.pdf

GOST 24243-1990 Positive-displacement hydraulic drives Filter elements Overall and mounting dimensions《液压驱动装置及润滑系统 过滤元件 外形及连接尺寸》.pdf

GOST 24244-1980 Low carbon sheet coid-rolling for enamelled ware Technical conditions《搪瓷器皿用低碳钢冷轧薄板材 技术条件》.pdf

GOST 24246-1996 Box clutches Parameters design and dimensions《套筒接管器 基本参数 结构及尺寸》.pdf

GOST 24247-1980 Triangular throw-away (indexable) carbide cutting inserts with cylindrical holes and chip-breaking flutes on both faces Design and dimensions《可转位的多面带孔和双面有碎屑器槽的硬质合金切.pdf

GOST 24248-1980 Square throw-away (indexable) carbide cutting inserts with cylindrical holes and chip-breaking flutes on both faces Design and dimensions《可转位的多面带孔和双面有碎屑器槽硬质合金切削刀片 结.pdf

GOST 24249-1980 Rhombic throw-away (indexable) carbide cutting inserts with 80 included angle with cylindrical holes and chip-breaking flutes on both faces Desing and dimensions《可转.pdf