MSZ 7943 7-1980 《石结构金属顶盖，冠状泥沙浆顶盖》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

CSN 02 2011-1952 Taper pins for correspondent bolts《珠状销钉》.pdf

CSN 02 2014-1952 Lubrication of pins Connecting dimensions《凸榫润滑 连接规格》.pdf

CSN 02 2031-1955 Precision rivets《精密铆钉 n》.pdf

CSN 02 2039-1992 Two-part rivets Technical delivery code and dimensions《两部分组成的铆钉 技术交付代码和尺寸》.pdf

CSN 02 2104-1982 Clamp length of pins《钉销的夹具长度》.pdf

CSN 02 2112-1973 Headed clevis pins with tolerances f 8 and hole for split pin《公差为8的有夹U形夹销和开口销孔》.pdf

CSN 02 2114-1986 Pivots of the pivot chains《铰链的枢轴》.pdf

CSN 02 2121-1952 Tfreaded pins《带螺纹的凸榫》.pdf

CSN 02 2140-1981 Rivet pins《铆钉引脚》.pdf