MSZ 8012-1982 《锯子，木材替代材料容器和隔板》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GOST 20162-1974 Pattern plates with changeable wooden inserts for moulding box having inside dimensions 1200x1000 mm for moulding foundry machines with turn of half mould without s.pdf

GOST 20163-1974 Pattern plates with changeable wooden inserts for moulding box having inside dimensions 1600x1200 mm for moulding foundry machines with turn of half mould without s.pdf

GOST 20164-1974 Pattern plates with changeable wooden inserts for moulding box having inside dimensions 2000x1600 mm for moulding foundry machines with turn of half mould without s.pdf

GOST 20165-1974 Pattern plates with changeable wooden inserts for moulding box having inside dimensions 2600x1600 mm for moulding foundry machines with turn of half mould without s.pdf

GOST 20166-1974 Pattern plates with changeable wooden inserts for moulding box having inside dimensions 2500x2000 mm for moulding foundry machines with turn of half mould without s.pdf

GOST 20167-1974 Deep changeable wooden inserts by length from 406 to 806 mm width from 306 to 706 mm for pattern plates Design and dimensions《模板用长度406～806mm，铸宽度306～706mm可换厚木垫 结构及尺寸.pdf

GOST 20168-1974 Changeable wooden inserts by length from 1006 to 2006 mm width from 806 to 1606 mm for pattern plates Design and dimensions《模板用长度406～806mm，宽度306～706mm可换厚木垫 结构及尺寸》.pdf

GOST 20169-1974 Changeable wooden inserts by length from 1006 to 1206 mm width from 806 to 1006 mm for pattern plates Disign and dimensions《模板用长度1006～1206mm，宽度806～1006mm可换木垫 结构及尺寸》.pdf

GOST 20170-1974 Changeable wooden inserts by length from 2506 to 2606 mm width from 1606 to 2006 mm for pattern plates Design and dimensions《模板用长度2506～2606mm，宽度1606～2006mm可换木垫 结构及尺.pdf