MSZ 8220-1981 《纸和纸板湿测试》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD WSK-M4D676-A6-2011 POLYVINYL CHLORIDE (PVC) FLEXIBLE 75 A HARDNESS TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSK-M4D676-A1)《灵活硬度为75A的聚氯乙烯(PVC) 与福特WSS-M99P1111-A 一.pdf

FORD WSK-M4D676-A7-2011 POLYVINYL CHLORIDE (PVC) FLEXIBLE 80 A HARDNESS TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSK-M4D676-A1)《灵活硬度为80A的聚氯乙烯(PVC) 与福特WSS-M99P1111-A 一.pdf

FORD WSK-M4D676-A8-2011 POLYVINYL CHLORIDE (PVC) FLEXIBLE 50 A HARDNESS TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSK-M4D676-A1)《灵活硬度为50A的聚氯乙烯(PVC) 与福特WSS-M99P1111-A 一.pdf

FORD WSK-M4D676-A9-2011 POLYVINYL CHLORIDE (PVC) FLEXIBLE 90 A HARDNESS TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSK-M4D676-A1)《灵活硬度为90A的聚氯乙烯(PVC) 与福特WSS-M99P1111-A 一.pdf

FORD WSK-M4D681-A-2005 ACETAL (POM) HOMOPOLYMER MODIFIED HIGH IMPACT GRADE TO BE USED WITH FORD WSS-M99P1111-A 《高抗冲级改性乙缩醛共聚物（POM） 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD WSK-M4D681-A2-2005 ACETAL (POM) HOMOPOLYMER IMPACT MODIFIED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《均聚甲醛 抗冲改性模塑料(和FORD WSS-M99P1111-A一起使用)》.pdf

FORD WSK-M4D682-A-2005 ACRYLONITRILE STYRENE ACRYLATE POLYCARBONATE BLEND (ASA+PC) MEDIUM HEAT RESISTANT MEDIUM IMPACT STRENGTH INTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《汽车内部.pdf

FORD WSK-M4D682-A2-2005 ACRYLONITRILE STYRENE ACRYLATE POLYCARBONATE BLEND (ASA+PC) MEDIUM HEAT RESISTANT MEDIUM IMPACT STRENGTH TO BE USED WITH FORD WSS-M99P1111-A 《汽车内部用高抗冲中等耐高.pdf

FORD WSK-M4D684-A1-2013 ABS PC BLEND MEDIUM IMPACT STRENGTH MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A .pdf