MSZ 8312-1964 《清漆》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

KS T ISO 14853-2012 Plastics ― Determination of the ultimate anaerobic biodegradability in an aqueous system ― Method by measurement of biogas《塑料 水系条件下厌氧生分解度测定 沼气生产量测定方法》.pdf

KS T ISO 1535-2006 Continuous mechanical handling equipment for loose bulk materials－Troughed belt conveyors(other than portable conveyors)－Belts《松散物料连续搬运设备 槽形带式输送机(携带式输送机除外) 输送带》.pdf

KS T ISO 15867-2009 Intermediate bulk containers(IBCs) for non-dangerous goods－Terminology《非危险品用中间散货容器 术语》.pdf

KS T ISO 15985-2012 Plastics-Determination of the ultimate anaerobic biodegradability and disintegration under high ― solids anaerobic ― digestion conditions ― Method by analysis .pdf

KS T ISO 1807-2006 Continuous mechanical handling equipment forloose bulk materials-Oscillating conveyors and shaking or reciprocating feeders with rectangular or trapezoidal troug.pdf

KS T ISO 1815-2006 Continuous mechanical handling equipment for loose bulk materials－Vibrating feeders and conveyors with tubular trough《松散物料连续搬运设备 管式振动给料机和输送机》.pdf

KS T ISO 20200-2012 Plastics－Determination of the degree of disintegration of plastic materials under simulated composting conditions in a laboratory-scale test《塑料 实验室规模堆肥化条件下塑料材料的.pdf

KS T ISO 2109-2006 Continuous mechanical handling equipment－Light duty belt conveyors for loose bulk materials《连续搬运设备 松散物料用的轻型带式输送机》.pdf

KS T ISO 2139-2006 Continuous mechanical handling equipment for loose bulk materials－Oscillating conveyors and shaking or reciprocating feeders with tubular trough《松散物料连续搬运设备 管式摆动输.pdf