MSZ 8478-1958 《灰铁合金闭合螺栓 表面压力16》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

DIN ISO 11843-5-2010 Capability of detection - Part 5 Methodology in the linear and non-linear calibration cases (ISO 11843-5 2008) Text in German and English《检测性能 第5部分 线性和非线性校准情况的.pdf

DIN ISO 11900-1-2011 Tools for pressing - Ball-lock punch retainers - Part 1 Types A and B rectangular and square for light duty (ISO 11900-1 2007)《冲压工具 球锁冲头固定板 第1部分 轻负荷矩形和方形的A类和B类.pdf

DIN ISO 11900-2-2011 Tools for pressing - Ball-lock punch retainers - Part 2 Types C and D reduced for light duty (ISO 11900-2 2008)《冲压工具 球锁冲头固定板 第2部分 简化轻型C和D类固定板(ISO 11900-2-2008).pdf

DIN ISO 11900-3-2005 Tools for pressing - Ball-lock punch retainers - Part 3 Type E reduced for heavy duty (ISO 11900-3 2004)《冲压工具 球锁紧冲头固定板 第3部分 用于重载荷的减径E型固定板》.pdf

DIN ISO 11901-1-2005 Tools for pressing - Gas springs - Part 1 General specifications (ISO 11901-1 2003)《冲压工具 气压弹簧 第1部分 一般规范》.pdf

DIN ISO 11901-2-2005 Tools for pressing - Gas springs - Part 2 Specification of accessories (ISO 11901-2 2004)《冲压工具 气压弹簧 第2部分 附件规范》.pdf

DIN ISO 11903-2010 Tools for pressing - Guide pillar mountings (ISO 11903 2008)《冲模 导柱配件(ISO 11903-2008)》.pdf

DIN ISO 11916-1-2014 Soil quality - Determination of selected explosives and related compounds - Part 1 Method using high-performance liquid chromatography (HPLC) with ultraviolet .pdf

DIN ISO 11916-2-2014 Soil quality - Determination of selected explosives and related compounds - Part 2 Method using gas chromatography (GC) with electron capture detection (ECD) o.pdf