MSZ 8552-1984 《特征尺寸的圆柱》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

DIN 51176-2-2008 Vitreous and porcelain enamels - Presentation and characterization of defects - Part 2 Thin-film coats《釉和搪瓷 缺陷的表达和描述 第2部分 薄膜涂层》.pdf

DIN 51179-2016 Vitreous and porcelain enamels - Low-voltage test for detecting and locating defects on profiled surfaces - Slurry test《釉瓷和搪瓷 异形表面缺陷检测和定位用低电压测试 泥浆试验》.pdf

DIN 5118-2017 Tools for pressing - Punches with trombone neck《冲压工具 长颈冲头》.pdf

DIN 51191-2015 Vitreous and porcelain enamels - Sliding friction wear test using an abrasion wheel《釉瓷和搪瓷 使用砂轮的滑动摩擦磨损试验》.pdf

DIN 51200-2016 Materials testing machines - Design and application of holding devices for test pieces in hardness testing machines《材料试验机 硬度试验机的试样夹紧装置的设计和应用》.pdf

DIN 51214-2009 Testing of Steel - Tensile test for round wires using knotted specimens《钢试验 圆钢丝打结试样的拉伸试验》.pdf

DIN 51220-2003 Materials testing machines - Generals for requirements and for verification and calibration of materials testing machines《材料试验机 材料试验机检定和校准一般要求》.pdf

DIN 51222-2017 Materials testing machines - Impact test - Particular requirements on pendulum impact testing machines with a capacity of nominal energy = 50 J and verification《材料检验.pdf

DIN 51231-1-2001 Material testing machines - Testing equipment for structural components - Part 1 Floor slabs《材料试验机 建筑构件检验设备 第1部分 底板》.pdf