MSZ 8653-1959 《镍化学检测》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD ESB-M4D284-C1-2009 POLYVINYL CHLORIDE EXTRUSION AND MOLDING GRADE EXTERIOR - SOIL RESISTANT TO BE USED WITH FORD WSS-M99P1111-A 《汽车外部用耐污挤塑和模塑级聚氯乙烯 与标准FORD WSS-M99P1111-A一起使.pdf

FORD ESB-M4D284-C2-2009 POLYVINYL CHLORIDE EXTRUSION AND MOLDING GRADE EXTERIOR - SOIL RESISTANT TO BE USED WITH FORD WSS-M99P1111-A 《汽车外部用耐污挤塑和模塑级聚氯乙烯 与标准FORD WSS-M99P1111-A一起使.pdf

FORD ESB-M4D284-C3-2009 POLYVINYL CHLORIDE EXTRUSION AND MOLDING GRADE EXTERIOR - SOIL RESISTANT TO BE USED WITH FORD WSS-M99P1111-A 《汽车外部用耐污挤塑和模塑级聚氯乙烯 与标准FORD WSS-M99P1111-A一起使.pdf

FORD ESB-M4D284-C4-2009 POLYVINYL CHLORIDE EXTRUSION AND MOLDING GRADE EXTERIOR - SOIL RESISTANT TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD ESB-M4D284-C1)《汽车外部用耐污挤塑和模塑级聚氯.pdf

FORD ESB-M4D297-A1-2009 ABS 10% GLASS FIBER REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《丙烯腈-丁二烯-苯乙烯共聚物（ABS）10%玻璃纤维增强的成型料 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD ESB-M4D297-A2-2009 ABS 20% GLASS FIBER REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《20%玻璃纤维增强的丙烯腈-丁二烯-苯乙烯共聚物(ABS)成型料 与标准FORD WSS-M99P1111-A一起使用 列于标准FOR.pdf

FORD ESB-M4D297-A3-2005 ABS 30% GLASS FIBER REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A (Shown on ESB-M4D297-A1)《30%玻璃纤维增强的丙烯腈-丁二烯-苯乙烯共聚物(ABS)成型料 与标准FORD WSS.pdf

FORD ESB-M4D299-A-2011 POLYPROPYLENE GLASS FIBER REINFORCED INJECTION MOLDING COMPOUND - NATURAL TO BE USED WITH FORD WSS-M99P1111-A 《玻璃纤维加强喷射成型自然聚丙烯 与福特WSS-M99P1111-A 一起使用》.pdf

FORD ESB-M4D300-A-2008 ABS MOLDING COMPOUND HIGH IMPACT - HIGH TEMPERATURE TO BE USED WITH FORD WSS-M99P1111-A 《丙烯腈-丁二烯-苯乙烯模塑料 耐冲击 耐高温(和FORD WSS-M99P1111-A一起使用)(使用 FORD WSB-M4D69.pdf