MSZ 9335-1980 《压轧铜，铜合金环形弹簧的尺寸》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

MSZ 3849-1958 《铣床，锯齿状适用于轻质金属ω=45带有斜三角，或长螺钉槽》.pdf

MSZ 385 1-1981 《铁路车辆零件油轮管的连接》.pdf

MSZ 385 2-1981 《轨道交通工具配件 蒸汽开关套》.pdf

MSZ 385-1976 《矿物水产品的分级和检验方法》.pdf

MSZ 3850-1958 《铣床 锯齿状适用于轻质金属 a=45带有斜三角，或十字方向螺钉槽》.pdf

MSZ 3851-1958 《带遮盖物的铣床刀具 遮盖物45度倾斜，长形槽的钉子》.pdf

MSZ 3852-1971 《带长插销的额头铣床刀具》.pdf

MSZ 3852-1979 《MSZ 3852－79纵向车削》.pdf

MSZ 3853-1971 《十字形槽的铣床刀具》.pdf