MSZ 9402 9 lap-1958 《纺织材料颜色固定检测 硫磺酸碳化检测》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GOST 20851 2-1975 Mineral fertilizers Methods for determination of phosphates《矿物肥料 含氮量测定法》.pdf

GOST 20851 4-1975 Mineral fertilizers Methods for determination of water《矿物肥料 含水量测定法》.pdf

GOST 20855-1983 Data transimission system signal conversion modulus for switched and unswitched voice frequency channels Types and basic parameters《音调频率换向和非换向通道用数据传输设备的信号转换装置 型式和基本.pdf

GOST 20859 1-1989 Power semiconductor devices General technical requirements《电力半导体器件 一般技术条件》.pdf

GOST 20862-1981 Adjusting fixturing hexahedral supports with theaded end and hole Design and dimensions《有螺纹尾端和孔的六角固定安装支架 结构和尺寸》.pdf

GOST 20863-1981 Adjusting fixturing rings supports with a flat threaded end and hole Design and dimensions《有螺纹尾端和孔的带平座圆固定安装支架 结构和尺寸》.pdf

GOST 20864-1981 Adjusting fixturing ring supports with slit theaded end and hole Design and dimensions《有螺纹尾端和孔的带槽园固定安装支架 结构和尺寸》.pdf

GOST 20865-1981 Adjusting fixturing hexahedral supports with threaded holes Design and dimensions《有螺纹孔的六角固定安装支架 结构和尺寸》.pdf

GOST 20866-1981 Adjusting fixturing ring support with flats and threaded holes Design and dimensions《有光平面和螺纹孔的圆固定安装支架 结构和尺寸》.pdf