MSZ 9521-1957 《分析用氯化物》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD WSD-M2D411-A-2004 POLYURETHANE (PUR) FOAM MICROCELLULAR SHOCK AND VIBRATION ISOLATING TO BE USED WITH FORD WSS-M99P1111-A 《隔震微孔 聚氨酯(PUR)泡沫塑料(和FORD WSS-M99P1111-A一起使用)》.pdf

FORD WSD-M2D420-A2-2009 RUBBER POLYCHLOROPRENE (CR) LOW TEMPERATURE FLEXIBLE 60 IRHD HARDNESS TO BE USED WITH FORD WSS-M99P1111-A 《IRHD硬度为60的柔性耐低温聚氯丁烯（CR）橡胶 与标准FORD WSS-M99P1111.pdf

FORD WSD-M2D420-A3-2009 RUBBER POLYCHLOROPRENE (CR) LOW TEMPERATURE FLEXIBLE 70 IRHD HARDNESS TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSD-M2D420-A2)《IRHD硬度为70的柔性耐低温聚氯丁.pdf

FORD WSD-M2D421-A-2009 RUBBER THERMOPLASTIC POLYURETHANE (PUR) OIL RESISTANT HYDROLYSIS RESISTANT 80 IRHD HARDNESS TO BE USED WITH FORD WSS-M99P1111-A 《IRHD硬度为80的耐油、耐水解热塑性聚氨酯(PUR.pdf

FORD WSD-M2D428-A-2009 THERMOPLASTIC POLYESTER ETHER ELASTOMER (TEEE) 45 DUROMETER D HARDNESS TO BE USED WITH FORD WSS-M99P1111-A 《硬度为45 D的热塑性聚酯-乙醚弹性体（TEEE）成型料 与标准FORD WSS-M99P1.pdf

FORD WSD-M2D435-A-2010 RUBBER HYDROGENATED NITRILE (HNBR) OXIDIZED AND OXYGENATED FUEL RESISTANT TO BE USED WITH FORD WSS-M99P1111-A 《耐氧化和含氧燃料的氢化丁腈橡胶（HNBR） 与标准FORD WSS-M99P1111-.pdf

FORD WSD-M2D437-A-2009 POLYURETHANE (PUR) FOAM MOLDED TO BE USED WITH FORD WSS-M99P1111-A 《模制聚氨酯(PUR)泡沫 与标准FORD WSS-M99P1111-A一起使用 [使用 FORD WSS-M15P20-B1 FORD WSS-M15P20-B1 FOR.pdf

FORD WSD-M2D439-A-2009 RUBBER FLUOROSILICONE (FVMQ) OXIDISED AND OXYGENATED FUEL RESISTANT 55 IRHD HARDNESS TO BE USED WITH FORD WSS-M99P1111-A 《IRHD硬度为55的耐氧化和含氧燃料的氟硅橡胶(FVMQ) 与标.pdf

FORD WSD-M2D440-A-2004 FLUOROELASTOMER (FKM) OXYGENATED OXIDIZED FUEL RESISTANT METHANOL RESISTANT 80 IRHD HARDNESS TO BE USED WITH FORD WSS-M99P1111-A 《IRHD硬度为80的耐充氧 氧化燃料的氟橡胶(FK.pdf