MSZ 9698 6 lap-1961 《蔬菜检测 成熟度检测》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GOST 16235-1970 Folding chill moulds Basic dimensions《折叠冷硬铸模 基本尺寸规格》.pdf

GOST 16236-1970 Chill moulds with parallel joint Basic dimensions《带平行分型金属铸型(硬模) 基本尺寸》.pdf

GOST 16237-1970 Chill moulds Thickness of walls《冷硬铸模 壁厚》.pdf

GOST 16238-1970 Chill moulds Ribs of rigidity Dimensions《金属铸型(硬模) 加强筋尺寸》.pdf

GOST 16239-1970 Chill moulds Cooling pins Dimensions《冷硬铸模 冷却片 尺寸规格》.pdf

GOST 16240-1970 Chill moulds Clearances between guides of metal cores and chill mould《冷硬铸模 金属芯子和冷硬铸模导向装置间隙》.pdf

GOST 16241-1970 Chill moulds Roughness of surface《金属铸型(硬模) 表面粗糙度》.pdf

GOST 16242-1970 Chill moulds Screwed handles Construction and dimensions《冷硬铸模 螺旋手柄 结构和尺寸规格》.pdf

GOST 16243-1970 Chill moulds Columns Construction and dimensions《冷硬铸模 圆柱 结构和尺寸规格》.pdf