MSZ 9698-1 lap-1960 《蔬菜分类检测一般标准》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GOST 22387 3-1977 Natural gases Method for determination of oxygen《天然燃气 含氧量测定法》.pdf

GOST 22387 4-1977 Gas for domestic and public utilities Method for determination of tar and dust content《公共生活消费用煤气 焦油和灰尘含量测定法》.pdf

GOST 22387 5-2014 Gas for domestic and public use Methods for determination of odor intensity《家用和公共用气 气味强度的测定方法》.pdf

GOST 22390-1977 Automobile body-boxes Fixture parts and circuits for cluster spacing of entrenching tools Technical requirements《汽车车体 土工器具固定部件和相互配置图 技术要求》.pdf

GOST 22393-1977 Universal boring heads Main dimensions《万能镗削头 基本尺寸》.pdf

GOST 22394-1977 Stocks for round dies diameters 16 and 20 mm Types and basic dimensions《直径16mm和20mm圆扳牙用扳手 型式和基本参数》.pdf

GOST 22395-1977 Stocks for round dies diameters from 25 to 90 mm Types and basic dimensions《直径26mm～90mm圆扳牙用扳手 基本尺寸》.pdf

GOST 22397-1977 Zinc powder Method of spectral analysis《锌粉 光谱分析法》.pdf

GOST 22398-1977 Tap wrenches with one nest for tools with square shanks Basic dimensions《带正方形柄工具用的单插孔扳手 基本尺寸》.pdf