MSZ 9820-1952 《无边女帽》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

AECMA PREN 3456-1993 Aerospace Series Titanium Alloy TI-P64001 Annealed Sheet and Strip Hot Rolled a Less Than or Equal to 6 mm Edition P 2《航空航天系列.钛合金 TI-P64001退火处理片和带 热轧a小于或等于6 mm.pdf

AECMA PREN 3457-2002 Aerospace Series Titanium Alloy TI-P63 Not Heat Treated Reference Heat Treatment Solution Treated and Aged Grade 2 Forging Stock for Fasteners D Less Than or E.pdf

AECMA PREN 3458-2002 Aerospace Series Titanium Alloy TI-P63 Annealed 900 Less Than or Equal to Rm Less Than or Equal to 1160 MPa Bar and Wire for Fasteners Machined De Less Than or.pdf

AECMA PREN 3459-1996 Aerospace Series Titanium Alloy TI-P63001 Solution Treated and Aged Plate 6 mm Less Than a Less Than or Equal to 50 mm Edition P 2 Edition P 2《航空航天系列.钛合金TI-P63.pdf

AECMA PREN 3460-1996 Aerospace Series Titanium TI-P99002 Annealed Bar for Machining a or D Less Than or Equal to 150 mm Rm Greater Than or Equal to 390 MPa Edition P 2《航空航天系列.钛合金TI.pdf

AECMA PREN 3461-1994 Aerospace Series Titanium TI-P99003 Annealed Bar for Machining D Less Than or Equal to 150 mm 540 MPa Less Than or Equal to Rm Less Than or Equal to 740 MPa Ed.pdf

AECMA PREN 3462-1994 Aerospace Series Titanium Alloy TI-P19001 Annealed Bar for Machining D Less Than or Equal to 150 mm Edition P 2《航空航天系列.钛合金TI-P19001退火棒材直径D小于或等于150 mm》.pdf

AECMA PREN 3463-1994 Aerospace Series Titanium Alloy TI-P19001 Solution Heat Treated and Aged Bar for Machining D Less Than or Equal to 75 mm Edition P 2《航空航天系列.钛合金 TI-P19001溶液加热和老.pdf

AECMA PREN 3464-1996 Aerospace Series Titanium Alloy TI-P64001 Annealed Plate 6 mm Less Than a Less Than or Equal to 100 mm Edition P 2《航空航天系列.钛合金TI-P64001退火板6 mm小于或等于a小于或等于100 mm》.pdf