MSZ 11860-1984 《栗色》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD WSS-M4D648-B2-2014 POLYAMIDE (PA) 66 HEAT STABILIZED MOLDING COMPOUND MOLDED IN COLOR INTERIOR TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSS-M4D648-B1).pdf

FORD WSS-M4D648-B2-2015 POLYAMIDE (PA) 66 HEAT STABILIZED MOLDING COMPOUND MOLDED IN COLOR INTERIOR TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSS-M4D648-B1).pdf

FORD WSS-M4D649-A2-2008 POLYETHYLENE (PE) FOAM CHEMICALLY CROSSLINKED CLOSED CELL TO BE USED WITH FORD WSS-M99P1111-A 《聚乙烯(PE)沫 交联化 闭孔式 (协同FORD WSS-M99P1111-A一道使用)[用于 FORD WSS-M9.pdf

FORD WSS-M4D649-A3-2008 POLYETHYLENE (PE) FOAM CHEMICALLY CROSSLINKED CLOSED CELL TO BE USED WITH FORD WSS-M99P1111-A 《聚乙烯(PE)泡沫化学交联密闭槽 (与FORD WSS-M99P1111-A一起使用) [使用 FORD WSS-M9.pdf

FORD WSS-M4D649-A4-2011 POLYETHYLENE (PE) FOAM CHEMICALLY CROSSLINKED CLOSED CELL TO BE USED WITH FORD WSS-M99P1111-A 《化学交联闭室聚乙烯(PE)泡沫 与福特WSS-M99P1111-A 一起使用》.pdf

FORD WSS-M4D651-B2-2013 POLYPROPYLENE COPOLYMER 10% MINERAL FILLED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M4D663-A2-2006 POLYAMIDE (PA) 66 HEAT STABILIZED 33% GLASS FIBER REINFORCED LASER MARKABLE TO BE USED WITH FORD WSS-M99P1111-A 《可用激光标识的33%玻璃纤维增强的受热稳定的聚酰胺(PA)66 与标准FORD .pdf

FORD WSS-M4D664-A3-2006 POLYMIDE (PA) 6 HEAT STABILIZED 33% GLASS FIBER REINFORCED MINIMUM 25% PCR CONTENT TO BE USED WITH FORD WSS-M99P1111-A (Use WSS-M4D968-A)《最低PCR含量为25%的33%玻.pdf

FORD WSS-M4D664-A4-2006 POLYAMIDE (PA) 6 HEAT STABILIZED 30% GLASS FIBER MINERAL REINFORCED MINIMUM 25% PCR AND OR PIR CONTENT TO BE USED WITH FORD WSS-M99P1111-A (Use WSS-M4D968.pdf