MSZ 12466-1952 《整体家具 尖头箱小型》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

DIN 340-2006 Parallel shank twist drills long series《直柄麻花钻 长型系列》.pdf

DIN 3401-1966 Drip-feed lubricators and cups main dimensions《滴油注油器和油杯 主要尺寸》.pdf

DIN 34016-1980 Laminated springs spring link washer bearing plates for spring suspension《叠层弹簧 弹簧悬挂的弹簧连接垫圈支承板》.pdf

DIN 3404-1988 Lubricating nipples button head《扁平注油嘴》.pdf

DIN 3405-1986 Lubricating nipples cupped type《杯形润滑油嘴》.pdf

DIN 341-2006 Morse taper shank twist drills for use in jig bushes long series《钻模导套用莫氏锥柄麻花钻 长型系列》.pdf

DIN 3410-1974 Lubricating nipples overall and fitting dimensions《润滑油排出管嘴 总尺寸和装配尺寸》.pdf

DIN 3411-1972 Grease box light construction《润滑油箱 轻型结构》.pdf

DIN 34110-1991 Piston rings for general engineering R-rings plain compression rings 10 up to 1200 mm nominal diameter《一般公称用活塞环 公称直径为10至1200mm的 R 型环、普通压紧环》.pdf