MSZ 12738-1980 《纬线打底的链结构布料》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ANSI ASTM F860-2007 Standard Specification for Hot Water Sanitizing Commercial Dishwashing Machines Multiple Tank Rackless Conveyor Type《多槽无架传送型热水消毒商用洗碗机》.pdf

ANSI ASTM F861 REV A-2014 Standard Specification for Commercial Dishwashing Racks.pdf

ANSI ASTM F877 REV A-2011 Standard Specification for Crosslinked Polyethylene (PEX) Hot- and Cold-Water Distribution Systems.pdf

ANSI ASTM F884-2001 Standard Test Method for Motor Life Evaluation of a Built-In (Central Vacuum) Vacuum Cleaner《中央真空吸尘器马达寿命评估试验方法》.pdf

ANSI ASTM F885-1984 Standard Specification for Envelope Dimensions for Bronze Globe Valves NPS 1 4 to 2《青铜球型阀美国标准直管螺纹1 4至2阀套尺寸规范》.pdf

ANSI ASTM F888-2006 Standard Test Method for Measuring Maximum Function Volume of the Primary Dirt Receptacle in a Vacuum Cleaner.pdf

ANSI ASTM F891-2016 Standard Specification for Coextruded Poly(Vinyl Chloride) (PVC) Plastic Pipe With a Cellular Core.pdf

ANSI ASTM F894-2013 Standard Specification for Polyethylene (PE) Large Diameter Profile Wall Sewer and Drain Pipe《聚乙烯(PE)大口径异形内壁污水管和排水管标准规格》.pdf

ANSI ASTM F905-2004 Standard Practice for Qualification of Polyethylene Saddle-Fused Joints《聚乙烯鞍形熔融接头合格鉴定的实施规范》.pdf