MSZ 13239 4-1980 《交通用机油镍铝钴K系》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

DIN 3906-2001 Non soldering compression fittings with cutting ring - Branch T-stud with taper threaded stud end (not for new design)《带有切割环的非焊接压缩配件 带锥形螺纹末端的分支T形螺栓(不用于新设计)》.pdf

DIN 3907-1987 Olive type compression couplings male stud tees (stud branch)《椭圆形压接管接头 螺柱式插接三通管接头（螺柱分管）》.pdf

DIN 3913-2001 Non soldering compression fittings with cutting ring - Run T-stud with taper threaded stud end (not for new design)《带有切割环的非焊接压缩配件 带锥形螺纹末端的活动T形螺栓(不用于新设计)》.pdf

DIN 3914-1987 Olive type compression couplings male stud tees (stud run)《椭圆形压接管接头 螺柱式插接三通管接头（螺柱插接）》.pdf

DIN 3942-2002 Non-soldered compression fittings - Swivel elbows with 24 cone connectors with O-ring - Adjustable for design and type of compression end according to DIN EN ISO 8434.pdf

DIN 3943-2002 Non-soldered compression fittings - Swivel branch tees with 24 cone connectors with O-ring - Adjustable for design and type of compression end according to DIN EN ISO.pdf

DIN 3944-2002 Non-soldered compression fittings - L-adaptors with 24 cone connectors and O-ring - Adjustable for design and type of compression end according to DIN EN ISO 8434-1《非.pdf

DIN 3945-2002 Non-soldered compression fittings - Straight stud swivel adaptor with 24 cone connectors with O-ring - For design and type of compression end according to DIN EN ISO .pdf

DIN 3946-2002 en 6201 Non-soldered compression fittings - Straight reducing swivel adaptors with 24 cone connectors with O-ring - For design and type of compression end according t.pdf