MSZ 13290 4 lap-1967 《学校用木材 园林建设和公共绿地建设 矮树丛景观》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

BS EN ISO 4490-2014 Metallic powders Determination of flow rate by means of a calibrated funnel (Hall flowmeter)《金属粉末 使用校准漏斗(霍尔流量计)方法测定流动时间》.pdf

BS EN ISO 4491-2-1999 Metallic powders - Determination of oxygen content by reduction methods - Loss of mass on hydrogen reduction (hydrogen loss)《金属粉末 用还原法测定氧含量 氢还原时的质量损失(氢损失)》.pdf

BS EN ISO 4491-3-2006 Metallic powders - Determination of oxygen content by reduction methods - Hydrogen-reducible oxygen《金属粉末 用还原法测定氧含量 可被氢还原的氧量》.pdf

BS EN ISO 4491-4-2013 Metallic powders Determination of oxygen content by reduction methods Total oxygen by reduction-extraction《金属粉末 用还原法测定氧含量 用还原萃取法测定总氧量》.pdf

BS EN ISO 4498-2010 Sintered metal materials excluding hardmetals - Determination of apparent hardness and microhardness《不包括硬质金属的烧结金属材料 视硬度和微硬度的测定》.pdf

BS EN ISO 4499-1-2010 Hardmetals - Metallographic determination of microstructure - Photomicrographs and description《硬质合金 显微结构的金相学测定 显微照片和描述》.pdf

BS EN ISO 4499-2-2010 Hardmetals Metallographic determination of microstructure Measurement of WC grain size《硬质合金 显微组织的金相学测定 WC晶粒尺寸的测量》.pdf

BS EN ISO 4499-3-2016 Hardmetals Metallographic determination of microstructure Measurement of microstructural features in Ti (C N) and WC cubic carbide based hardmetals《硬质金属 显微组织的.pdf

BS EN ISO 4499-4-2016 Hardmetals Metallographic determination of microstructure Characterisation of porosity carbon defects and eta-phase content《硬质金属 显微组织的金相测定 孔隙度 碳缺陷和η相含量的表征》.pdf