MSZ 13290 6 lap-1967 《学校用木制品和公共绿地绿化攀援植物》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

BS EN 2545-2-1995 Titanium and titanium alloy remeling stock and castings - Technical specification - Remelting stock《钛和钛合金重熔料和铸件 技术规范 第2部分 重熔料》.pdf

BS EN 2545-3-1995 Titanium and titanium alloy remelting stock and castings - Technical specification - Pre-production and production castings《钛和钛合金重熔料和铸件 交付技术状态 第3部分 预生产铸件和生产铸件》.pdf

BS EN 2546-2006 Washers lock with radial serrations in corrosion resisting steel passivated for flight control rods - Dimensions《航空航天系列 飞行操纵杆用钝化耐蚀钢制的径向锯齿锁紧垫圈 尺寸》.pdf

BS EN 2547-1989 Specification for filming of documents - Microfilm 105 mm (Microfiche A6)《文件摄影规范 105mm缩微胶片(缩微平片A6)》.pdf

BS EN 2549-2006 Aerospace series - Bolts normal hexagonal head close tolerance normal shank short thread in titanium anodized MoS2 lubricated - Classification 1100 MPa (at ambient .pdf

BS EN 2550-1993 Rivets solid 100 normal countersunk head in aluminium 1050A inch based series《1050A型铝制100标准埋头实心铆钉 英制系列》.pdf

BS EN 2551-1993 Rivets solid 100 normal countersunk head with dome in aluminium alloy 2117 inch based series《2117型铝合金制100标准埋头圆顶实心铆钉 英制系列》.pdf

BS EN 2552-1993 Rivets solid 100 normal countersunk head with dome in aluminium alloy 2117 anodized or chromated inch based series《经阳极氧化或铬酸盐表面处理的2117型铝合金制100标准埋头圆顶实心铆钉 英制系列》.pdf

BS EN 2553-1993 Rivets solid 100 normal countersunk head with dome in aluminium alloy 2017A inch based series《2017A型铝合金制100标准埋头圆顶实心铆钉 英制系列》.pdf