MSZ 13530-1964 《汽车用阻止空气流通装置，管道连接螺钉》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

EN 728-1997 en Plastics Piping and Ducting Systems - Polyolefin Pipes and Fittings - Determination of Oxidation Induction Time《塑料管道和导管系统 聚烯烃管和配件 氧化感应时间的测定》.pdf

EN 73-2014 en Wood preservatives - Accelerated ageing of treated wood prior to biological testing - Evaporative ageing procedure《木材防腐处理 在生物实验之前经处理木材的加速老化 蒸发老化过程》.pdf

EN 730-1-2002 en Gas welding equipment Safety devices Part 1 Incorporating a flame (flashback) arrestor《气焊设备 安全装置 第1部分 组合回火熄灭器》.pdf

EN 730-2-2002 en Gas welding equipment Safety devices Part 2 Not incorporating a flame (flashback) arrestor《气焊设备的安全性装置 第2部分 未使用火焰(反逆弧)阻止器》.pdf

EN 732-1998 en Specifications for Dedicated Liquefied Petroleum Gas Appliances - Absorption Refrigerators《专用于液化石油气器具的规范 吸收式制冷器》.pdf

EN 733-1995 en End-Suction Centrifugal Pumps Rating with 10 Bar with Bearing Bracket - Nominal Duty Point Main Dimensions Designation System《带支承架的额定值为10bar的端吸式离心泵 公称负荷点 主要尺寸和命名系统》.pdf

EN 734-1995 en Side Channel Pumps PN 40 - Nominal Duty Point Main Dimensions Designation System《带侧通道泵PN40 公称负荷点 主要尺寸 标识系统》.pdf

EN 735-1995 en Overall Dimensions of Rotodynamic Pumps - Tolerances《旋转动态泵的总体尺寸 公差》.pdf

EN 736-1-1995 en Valves - Terminology Part 1 Definition of Types of Valves《管件 术语 第1部分 基本结构定义》.pdf