MSZ 13537-1964 《汽车用阻止空气流通装置 活动联结》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

BS A 354-2000 Inserts self-locking with MJ threads closed type in metallic material coated or uncoated - Dimensions《涂覆或未涂覆的金属材料制的封闭式MJ螺纹的自锁衬套 尺寸》.pdf

BS A 355-2000 Inserts self-locking with MJ threads open type in metallic material coated or uncoated - Dimensions《涂覆或未涂覆的金属材料制的开放式MJ螺纹自锁衬套 尺寸》.pdf

BS A 356-2000 Inserts self-locking with MJ threads reduced flanges closed type in metallic material coated or uncoated - Dimensions《覆层的或未覆层的金属材料制的封闭式小尺寸法兰缘MJ螺纹自锁衬套 尺寸》.pdf

BS A 357-2000 Inserts with clearance hole in metallic material coated or uncoated - Dimensions《金属材料制的涂覆或未涂覆的带间隙孔的衬套 尺寸》.pdf

BS A 358-1-2000 MJ threads - General requirements《MJ螺纹 一般要求》.pdf

BS A 358-2-2000 MJ threads - Limit dimensions for bolts and nuts《MJ螺纹 螺栓和螺母的极限尺寸》.pdf

BS A 358-3-2000 MJ threads - Limit dimensions for fittings for fluid systems《MJ螺纹 流体系统用的接头的极限尺寸》.pdf

BS A 359-2000 Nuts barrel self-locking floating with MJ threads classifications - 900 MPa (at ambient temperature) 235 C 1100 MPa (at ambient temperature) 235 C 1250 MPa (at ambien.pdf

BS A 360-2000 Retainers spring sheet metal for self-locking barrel nuts - Dimensions《筒形自锁螺母用金属薄板弹簧承座 尺寸》.pdf