MSZ 13563-1961 《小型轮胎》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

JUS M C5 930-1980 Valve with rubber base for motor cycle tyre tubes《带橡胶支座的摩托车胎管阀门》.pdf

JUS M C7 100-1992 Revolving machine handles《循环机械把手》.pdf

JUS M C7 101-1992 Revolving machine handles《循环机械把手》.pdf

JUS M C7 300-1992 Valves - Hand-wheel offset arm type hole of hub round《阀门-手轮偏移杆型轮毂圆孔》.pdf

JUS M C7 302-1992 Valves - Hand-wheel offset arm type hole of hub parallel square《阀门-手轮偏移杆型轮毂孔，平行直角尺》.pdf

JUS M C7 304-1992 Hand-wheel offset arm type hole of hub tapered square《手轮偏移杆型轮毂孔，锥形直角尺》.pdf

JUS M C7 320-1992 Valves Hand-wheel offset arm type hole of tube parallel square《阀门-手轮偏移杆型，管孔，平行直角尺》.pdf

JUS M C7 361-1992 Valves-Hand-wheels of plastic《阀门 手 塑料轮》.pdf

JUS M C7 364-1992 Valves-Hand-wheels of aluminium cast alloys《阀门 手 铝合金轮》.pdf