MSZ 14340 6-1979 《闭合性放射源，技术测量仪使用的137Cs放射源的技术要求和分类》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD WSS-M4D741-B1-2012 POLYPROPYLENE (PP) HOMOPOLYMER COOLING AGENT RESISTANT MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M4D741-B2-2017 POLYPROPYLENE (PP) COPOLYMER COOLING AGENT RESISTANT MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M4D744-A3-2011 ACETAL (POM) HOMOPOLYMER COLOR PIGMENTED MOLDING COMPOUND MELT FLOW RATE 19 - 31 INTERIOR (Shown on FORD WSK-M4D744-A2)《内部着色熔态流动率为19-31的乙缩醛(POM)均聚物模塑材料 在福特W.pdf

FORD WSS-M4D744-A4-2014 ACETAL (POM) HOMOPOLYMER COLOR PIGMENTED MOLDING COMPOUND MELT FLOW RATE 1 5 - 3 5 INTERIOR TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSK-M4D744-.pdf

FORD WSS-M4D744-A5-2016 ACETAL (POM) MOLDING COMPOUND HOMOPOLYMER HIGH IMPACT LOW VOC EMISSION INTERIOR TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M4D749-A2-2010 POLYBUTYLENE TEREPHTHALATE (PBT) IMPACT MODIFIED 7% GLASS FIBER FILLED MOLDING COMPOUND《7%玻璃纤维填充的聚对苯二甲酸丁二醇酯（PBT）冲击改性成型料》.pdf

FORD WSS-M4D750-B1-2017 POLYBUTYLENE TEREPHTHALATE (PBT) 15% GLASS FIBER REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M4D752-B1-2013 POLYAMIDE (PA) 6 6 HEAT STABILIZED COOLING AGENT RESISTANT 30% GLASS FIBER REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M4D766-A2-2010 POLYETHYLENE TEREPHTHALATE (PET) 35 % GLASS FIBER REINFORCED MOLDING COMPOUND 100 % RECYCLED CONTENT TO BE USED WITH FORD WSS-M99P1111-A 《100%回收含量35%玻璃纤维增.pdf