MSZ 16548-1985 《普通十级全部出版标准字符，ETO 622矿产，623军事技术MSZ 16548 80标准字盘(FíD Publ No 390)》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

JUS M G1 102-1991 Acceptance conditions for horizontal spindle capstan turret and single spindle automatic lathes Testing of the accuracy Machinable bar diameters 25 mm or less and.pdf

JUS M G1 135-1994 Acceptance conditions for vertical turning and boring lathes with one or two columns and a single fixed or movable table - General introduction and testing of the.pdf

JUS M G4 010-1989 Mschine tools Testingofaccuracy Milling machines with horizonta! or vertical spindle with table of fixed height《机械工具 精度测试 水平磨床，竖式轴，平台高度固定》.pdf

JUS M G4 011-1989 Machine tools Testing of accuracy Milling machines with table of variable height with horizonta! or vertical spindle《机械工具 精度测试 磨床，多种平台高度，水平或竖直轴》.pdf

JUS M G4 020-1994 Machine tools - Acceptance conditions for plano-milling machines - Testing of the accuracy - Portal-type machines《机床 碾磨机械验收条件 精度测试 Portsl型机械》.pdf

JUS M G4 110-1978 Milling machine spindle noses with 7 24 taper《磨床主轴端7 24 锥尖》.pdf

JUS M G4 111-1978 Driving keys for milling machine spin le noses with 7 24 taper《锥度为7 24的铣床轴头主轴端传动键》.pdf

JUS M G5 010-1989 Machine tools Testing of accuracy Boring and miiling machines Planer type machines with movable column《机械工具 精度测试 钻磨机械 带移动柱的刨床》.pdf

JUS M G5 011-1991 Machine tools Testing of accuracy Boring and milling machines Table type machines《机械工具 精度测试 钻磨机械 台式机械》.pdf