MSZ 18091 19-1981 《防腐蚀材料检测，保持时间》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

DIN 1416-1971 Broaching tools design of tooth and tooth space《拉刀 齿和齿距的设计》.pdf

DIN 1417-1-1970 Broaching tools round shanks J and K with inclined driving plane《拉削刀具 带斜驱动面的圆柄J和K》.pdf

DIN 1417-2-1970 Broaching tools round end pieces L and M《拉刀 第2部分 圆端件 L 和 M》.pdf

DIN 1417-3-1970 Broaching tools rectangular shanks N with inclined driving plane (not for internal splines)《拉削刀 带倾斜驱动面的N矩形柄（不用于内花键）》.pdf

DIN 1417-4-1970 Broaching tools rectangular end pieces P (not for internal splines)《拉刀 第4部分 矩形端件 P (不用于轮毂键槽)》.pdf

DIN 1417-5-1970 Broaching tools rectangular shanks R with inclined driving plane (for internal splines)《拉刀 第5部分 倾斜式转动面矩形刀柄 R (用于轮毂键槽)》.pdf

DIN 1417-6-1970 Broaching tools rectangular end pieces S (for internal splines)《拉刀 第6部分 矩形端件 S (用于轮毂键槽)》.pdf

DIN 1418-1-1970 Holders for broaching tools with shanks and end pieces to DIN 1417 shank holders《符合 DIN 1417 带刀柄和端件的拉刀夹具 第1部分 刀柄夹具》.pdf

DIN 1418-2-1972 Holders for broaching tools with shanks and end pieces to DIN 1417 endpiece holders《符合 DIN 1417 带刀柄和端件的拉刀夹具 第2部分 端件夹具》.pdf