MSZ 21454 4-1976 《空气中普通污染物含量 3，4汽油含量检测》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

DIN ISO 7975-1987 Road vehicles braking in a turn open loop test procedure identical with ISO 7975 edition 1985《道路车辆 转圈制动 开环试验程序》.pdf

DIN ISO 7991-1998 Glass - Determination of coefficient of mean linear thermal expansion (ISO 7991 1987)《玻璃 热平均线性膨胀系数的测定》.pdf

DIN ISO 8002-1995 Mechanical vibrations - Land vehicles - Method for reporting measured data identical with ISO 8002 1986《机械振动 地面车辆 报告测量数据的方法 等同采用 ISO 8002 1986》.pdf

DIN ISO 8020-2003 Tools for pressing - Punches with cylindrical head and straight or reduced shank (ISO 8020 2002)《冲压工具 有圆柱头和直杆或者缩径柄的冲头》.pdf

DIN ISO 8037-1-2003 Optics and optical instruments - Microscopes Slides - Part 1 Dimensions optical properties and marking (ISO 8037-1 1986)《光学和光学仪器 显微镜 载玻片 第1部分 尺寸、光学性能和标志》.pdf

DIN ISO 80416-4-2008 Basic principles for graphical symbols for use on equipment - Part 4 Guidelines for the adaptation of graphical symbols for use on screens and displays (icons).pdf

DIN ISO 8061-2016 Alpine ski-bindings - Selection of release torque values (ISO 8061 2015)《高山雪橇扣拴 释放扭矩值的选择(ISO 8061-2015)》.pdf

DIN ISO 8082-1-2016 Self-propelled machinery for forestry - Laboratory tests and performance requirements for roll-over protective structures - Part 1 General machines (ISO 8082-1 .pdf

DIN ISO 8082-2-2016 Self-propelled machinery for forestry - Laboratory tests and performance requirements for roll-over protective structures - Part 2 Machines having a rotating pl.pdf