MSZ KGST 1366-1978 《空气污染源排放的污染物分级》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

CSN 13 7611-1988 Compression couplings for tubes Unequal male stud-body Design and basic dimensions《管用压紧联轴节 异径外螺纹 主体设计及基本尺寸》.pdf

CSN 13 7636-1985 Machine screwing Joining sockets straight and bulkmead studs for axial assembling Design and basic dimensions《机械螺纹 径向装配承插口；直排式和挡板式螺柱设计和基本尺寸》.pdf

CSN 13 7637-1988 Compression coupling for tubes Unequal coupling-body Design and basic dimensions《管用压紧联轴节 异径管接头 主体 设计及基本尺寸》.pdf

CSN 13 7638-1985 Machine screwing Welding socket straight for axial assembling Design and basic dimensions《机器螺钉 轴向组装用焊接直管承插口 设计和基本尺寸》.pdf

CSN 13 7639-1985 Machine screwing Solder socket straight for axial assembling Design and basic dimensions《机器螺旋 轴向组装用焊接直管承插口 设计和基本尺寸》.pdf

CSN 13 7640-1988 Compression couplings for tubes Equal elbow-body Design and basic dimensions《管用压紧联轴节 等径弯头 主体设计及基本尺寸》.pdf

CSN 13 7641-1988 Compression couplings for tubes Equal TEE-body Design and basic dimensions《管用压紧联轴节 等径三通 主体设计及基本尺寸》.pdf

CSN 13 7643-1987 Compression couplings for tubes Equal elbow adjustable with ring or fervule Design and basic dimensions《管用压缩联轴器 带有调节圈或套圈的等径弯头 设计和基本尺寸》.pdf

CSN 13 7644-1987 Compression couplings for tubes Equal tee adjustable with ring or fervule Design and basic dimensions《管用压缩联轴器 带有调节圈或套圈的等径三通 设计和基本尺寸》.pdf