MSZ KGST 1788-1979 《楔在工具内的楔子因外壳改制锥形的主要尺寸》.pdf

相关资源

易语言挂论坛工具源码.zip

HB 714-1979 4号内挂拉杆.pdf

MSZ 241-1957 《砌体工具挂重》.pdf

JC T 2173-2013 水泥预热器用陶瓷内筒挂.pdf

JC T 2173-2013 水泥预热器用陶瓷内筒挂片.pdf

HB 713-1979 3、2C、3C号内挂拉杆.pdf

TB T 2604.6-1996 13号钩尾框销孔长度和固定挂耳内档检查样板.pdf

MNOSZ 15879-1953 《挖掘工具柱形连接安装基本内镗》.pdf

MSZ 5128-1959 《挖掘工具柱形连接安装基本内镗》.pdf

MSZ 5127-1971 《挖掘工具外部加厚内镗以及机械臂》.pdf

猜你喜欢

DIN 5480-15 Berichtigung 1-2009 Involute splines based on reference diameters - Part 15 Inspection Corrigendum to DIN 5480-15 2006-03《基于参考直径的渐开线花键 第15部分 检查 技术勘误DIN 5480-15-2006》.pdf

DIN 5480-16 Berichtigung 1-2009 Involute splines based on reference diameters - Part 16 Tools Corrigendum to DIN 5480-16 2006-03《基于参考直径的渐开线花键 第16部分 工具 技术勘误DIN 5480-16-2006》.pdf

DIN 5480-2-2015 Involute splines based on reference diameters - Part 2 Nominal and inspection dimensions《基于参考直径的渐开线花键 第2部分 标称和检验尺寸》.pdf

DIN 54802-1-2015 Testing of plastics - Determination of plasticizer sorption and rate of plasticizer sorption in the heat of vinyl chloride (VC) polymers - Part 1 Planetary mixer m.pdf

DIN 54802-2-2015 Testing of plastics - Determination of plasticizer sorption and rate of plasticizer sorption in the heat of vinyl chloride (VC) polymers - Part 2 Statical method《塑.pdf

DIN 54813-1994 Testing of plastics testing of joints of textile glass reinforced polyester resins determination of the breaking load by the bending shear test《塑料检验 纺织玻璃纤维增强的聚酯树脂塑料的.pdf

DIN 54815-1-1998 Pipes of filled polyester resin moulding materials - Part 1 Dimensions materials designation《填充聚酯树脂模塑材料的管材 第1部分 尺寸、材料和标识》.pdf

DIN 54815-2-1998 Pipes of filled polyester resin moulding materials - Part 2 Requirements testings《填充聚酯树脂模塑材料的管材 第2部分 要求和试验》.pdf

DIN 5483-1-1983 Time-dependent quantities terms for the time-dependency《随时间变化的量 时间相关的术语》.pdf